One day, the AI aircraft in X-plane will not just fly straight and level in front of you until you get bored with giving them a chance to dodge and shoot them down…

Continued here:
Another step towards artificial intelligence.

YouTube Direktvideo link

Here an excerpt of the Art Video ” Psychedelic Flight over Geneva” shot and directed by video artist & director Misha Tognola.
Share This

See the rest here:
PSYCHEDELIC FLIGHT OVER GENEVA

The GWS Dream Starter is a basic flight simulator controller, designed to accurately simulate a four channel model airplane or helicopter transmitter. It works exactly like a regular computer joystick, and has a standard USB interface. This lets it work right out of the box, without installing any drivers.

Confusing Packaging - An Explanation

The box containing the flight simulator controller can be slightly misleading. The picture on the back of the package shows several chargers, cables, and a battery pack. The only thing the box contains is the actual controller. It would seem that the company who builds the simulator controller uses the same box to package several different products. Please note that this is not a problem, because the USB cable lets the simulator controller draw power from the computer. No battery packs or chargers are needed. The picture also shows a blue transmitter. Each simulator controller is black, so that it looks like actual RC transmitters. Don’t be alarmed when you only find the transmitter in the package. You don’t need anything else to fly using the simulator.

FMS Set Up Instructions

The GWS Flight Simulator Controller requires some configuration in order to work properly with the Flying Model Simulator. Here is a step by step procedure showing how to configure and calibrate your controller.

1. Install FMS. An installation CD-ROM is included with your controller. Just insert it into your disk drive and follow the on screen instructions. If you don’t have a CD-ROM, you can download FMS here.
2. When done, click the OK button at the bottom of the configuration window, then close the smaller “Control” window.
3. You should be able to adjust the simulated models trim by using the tabs on the controller. Please be aware that the engine of your simulated model will turn off, if the throttle trim is set to idle. You will need to move this trim tab upwards slightly, to achieve a good idle speed.

Congratulations, you have successfully configured the flying model simulator to work with your new simulator controller.

——
Draganfly Innovations Inc.
Phone: 1-800-979-9794 / 306-955-9907
Email: info@rctoys.com
Web: www.rctoys.com
RSS: www.rctoys.com/pr/feed

See the original post here:
FMS Set Up Instructions For The GWS Dream Starter Flight Simulator Kit