Chris Tosolini

Day 1 of qualifying is over and it is American ace Chris Tosolini who holds the current TQ honours for the 2008 IFMAR 200mm World Championships here is Lisbon. The Sirio team driver was one of only three drivers to record 32 laps today with a run of 10:18.325 which was half a second clear of the ever impressive Peter Jovanovic with former World Champion Adrien Bertin third a further 7/10th behind.

Check out the full coverage on our event site here.

More:
Tosolini ends Day in TQ position

Post to Twitter Post to Delicious Post to Digg Post to Facebook Post to MySpace

Parma 1/10 Mohawk 2 GBS body

Following the success of their Alfa and Mohawk bodies, Parma have released this new design 190mm body shell, which is ROAR approved and meets the new GBS (Global Body Spec) standards. The modified design is claimed to equal or exceed the performance of their earlier 190mm wide lightweight versions. Available in only one standard thickness .030″ clear and includes body, wing, vinyl window masks and decals.

Source: Parma [parmapse.com]

Team C Racing

Go here to read the rest:
Parma 1/10 Mohawk 2 GBS body

Post to Twitter Post to Delicious Post to Digg Post to Facebook Post to MySpace

Speed Passion LCD Pro Programmer

Speed Passion have announced the release of this new LCD Professional Program unit with built in USB / PC Interface tools. Allowing you to have more adjustable features, such as drag brake power by percentage (0 to 100%), it will support the company’s Silver Arrow 1/8 Esc DRRS power adjust, also by percentage. The LCD unit also pre-stores 3 different type of ESC setting, so you can easily load your favourite setting to suit different track condition. Available to purchase at the end of August.

Source: Speed Passion [speedpassion.net]

See the rest here:
Speed Passion LCD Pro Programmer

Post to Twitter Post to Delicious Post to Digg Post to Facebook Post to MySpace

Jilles Groskamp

Jilles Groskamp is the pace setter after the first round of qualifying here in Portugal but the Dutch driver was not the fastest in the run, that honour going to Daniele Ielasi but in post race scrutiny the Italian’s fuel tank was deemed to be to big. It was very close at the top with Ielasi posting a run of 31 laps in 10:02.628 with Groskamp just 8/100th behind.

Check out the full coverage on our event site here.

See original here:
Groskamp tops first qualifier in Lisbon

Post to Twitter Post to Delicious Post to Digg Post to Facebook Post to MySpace

Peter Jovanovic and rest of the Australians

Overnight rain here in Lisbon caused a delay to the start of proceedings as race organisers decided to wait an hour to allow the track to dry before starting the first qualifier of the 2008 IFMAR World Championships. Drivers from Groups 1-7 have just finished their two qualifiers for today, and are free to hit the beach, while Groups 8-15 are getting ready to kick start their battle for the Day 1 TQ honours. Peter Jovanovic, who was one of the stars at the last World Championships for 1:10 200mm in Brisbane where he claimed a podium finish, is loving the track here in Lisbon. The talented young Aussie says his car is working perfectly and he would rate the track as one of the best he has ever driven. Jovanovic says the circuit is a lot more flowing than he is used to back home and learning it has been his biggest obstacle so far. Now that he is mastering the bumps he’s really happy with his progress.

Check out the full coverage on our event site here.

Team C Racing

Here is the original:
Wet track delays start to qualifying

Post to Twitter Post to Delicious Post to Digg Post to Facebook Post to MySpace

Greyscale Racing MRCG 1/28 chassis

Greyscale Racing have announced the upcoming release of the MRCG, their new 1/28 pan chassis conversion kit. Based on Kyosho’s venerable Mini-Z MR-02, the MRCG adds 1.5mm quasi-isotropic graphite throughout, a new rear suspension design, an extremely low CG and polar moment of inertia, as well as a 15% weight reduction over the MR-02 to bring 1/12 performance to a class less than half the size! The chassis also features several other small innovations, such as a quick-release battery system and true Mini-Z body compatability to preserve the aesthetic appeal of the Mini-Z series. The MRCG is compatible with both Mini-Z electronics or modular electronics, and requires 4 AAA batteries and a 130-can motor.

Click here to see more photos… (more…)

Continued here:
Greyscale Racing MRCG 1/28 chassis

Post to Twitter Post to Delicious Post to Digg Post to Facebook Post to MySpace