Associated RC18T Foam Tires & 48P Pinions

Team Associated have released these new RC18T foam tires that have a 4mm larger wheel diameter than their predecessors. The larger wheel gives the best of both worlds for foam tire racing, a reduced sidewall height while keeping the correct tire outer diameter. The reduced sidewall results in improved steering consistency through the corners while maintaining forward traction. Racers no longer need to ‘true’ the foam tire down to an incorrect outer diameter just to achieve less foam on the sidewall. Associated have also released a range of nine new 48-pitch pinion gears from 27T–35T to enlarge your gearing options. More teeth equals more top end speed.

Associated RC18T Foam Tires & 48P Pinions

Source: Associated [rc10.com]


See the original post:
Associated RC18T Foam Tires & 48P Pinions

Post to Twitter

May 082009

Tamiya F104 Pro chassis

Tamiya have released details of the follow up to their ultra successful F103 chassis, with the release of the F104 Pro. Following the theme seen in HPI’s launch of the Formula Ten, the F104 pro, has an ultra realistic body shell and front and rear wings, and it too is based on last years F1 cars. It is of course a rear wheel drive, with drive direct from the motor and has the battery pack mounted along the centre line of the chassis and the whole layout seems very compact. The car features a carbon upper deck and rear shaft and has lots of blue anodized TRF performance parts as standard, including the car’s centrally mounted shock absorber. Another great looking entry into this class.

Source: Tamiya [tamiya.com]


See the rest here:
Tamiya F104 Pro chassis

Post to Twitter

May 082009

Shepherd Large Hauler bag

Shepherd Micro Racing have announced that their Hauler Bag has just arrived. Ready to carry your RC vehicle it has plenty of room for tools, tyres, engines and other equipment. The hauler features four small boxes and one large box that are made of special material for good durability and sport high quality plastic handles allowing easy access to your equipment. The small boxes are split by a separator, that can be removed to create one big compartment. Several elastic rings in the top compartment allow a nice organization of your tools, while two small pockets attached to the lid offer some extra space. There are four extra pockets on the outside that offer additional space to store equipment like a setup board or other items. Three extra smooth trolley wheels and a telescopic aluminium handle make the transportation very easy and the embroidered Shepherd Ram Head on the back and the Shepherd Micro Racing Logo on the front finish off the look.

Shepherd Large Hauler bag

Shepherd Large Hauler bag

Source: Shepherd [team-shepherd.com]


Excerpted from:
Shepherd Large Hauler bag

Post to Twitter

Hellipro 2500mAh Series Li-Po Battery for Helicopter New Arrived!!
Hellipro Li-Po 22.2V 2500mAh 25/40C 6S1P Battery (#HP-28459) 
Specification:
For: T-rex 500 / Mikado Logo 400
Capacity: 2500mAh
Number of Cells in Series: 6 cells
Connection: 6S1P
Voltage: 22.2V
Continuous Discharge Rate: 25C
Burst Discharge Rate: 40 C
Dimension: 118 x 50 x 34.5 mm
Weight: 420g
Hellipro Li-Po 11.1V 2500mAh 25/40C 3S1P Battery (#HP-28460) 
Specification:

For: T-rex [...]

More:
Hellipro 2500mAh Series Li-Po Battery for Helicopter Arrived

Post to Twitter

*click the image for more
The following Futaba products has been restocked recently @ rcMart.com!! 

Item No.
Description

3PM-2.4GHz
Futaba (#3PM-2.4GHz) 3 Channel Digital Proportional R/C System 2.4GHz

4PK-2.4G
Futaba (#4PK-2.4G) 4PK-2.4G w/R604FS

MC230CR
Futaba (#MC230CR) FET Speed Controller

MC330CR
Futaba (#MC330CR) FET Speed Controller

S3001
Futaba (#S3001) Rugged Low Profile Servo

#S3003
Futaba (#S3003) Standard Servo

#S3050
Futaba (#S3050) Digital Servo

#S9402
Futaba (#S9402) High Torque Servo

2PL – AM27
Futaba Mega Tech 2PL – [...]

The rest is here:
Futaba Servo / Speed Controller / Radio Restock!

Post to Twitter

Christian Wurst to use LMI Racing products

LMI Racing have agreed a deal with Christian Wurst to use their products for the 2009 season, including the new Blitz R09 body shell. The former European ‘B’ Champion, who races for Motonica, will this year compete in the West German Regional races as well as International races too, competing at the European ‘B’ Championship in Cassino, Italy as well as the World Championship in Lostalla, Switzerland.

Source: LMI Racing [lmi-racing.com]


Source:
Christian Wurst to use LMI Racing products

Post to Twitter