The flood lights have been turned on at Bumod but unfortunately the pits are empty after the rain returned to Bursa bringing to an end the opening day of Turkey’s inaugural international nitro event.  With the track wet the drivers have called it a day and made their way to what has to be the most plush r/c restaurant in the world, for dinner compliments of the race organisers. Drivers did however manage to get some partially dry running on the track, with two corners falling to develop a dry line.

Check out our full event coverage here.

Here is the original:
Rain calls end to Day 1 in Turkey

Red RC are at the rain affected Bumod GP in Bursa, Turkey and we were given an in depth look at the new Serpent 7xx 1/10th scale 200mm chassis. While we were able to take photos of the car, Serpent have asked us not to show them until a later time, allowing us only a photo of the bottom of the radio tray, just one of the very nice features of this well thought out car. Other new items at the event, that has attracted international racers from as far afield as Thailand and the USA, is a new Audi 200mm shell from German brand Orcan promising lots of steering and stability through the corners. Racing will begin as soon as the weather clears up, which looks to happen later this evening, given the racers a chance to run under the flood lights at the fabulous facility.

Check out of full coverage and image gallery here.

Read more:
Bumod GP – Serpent 7XX first photo

The 2nd round of the Belarusian Nitro Off-Road Championship took place last weekend in Minsk, Belarus. The event was open to two classes, buggy and truggy and was attended by 20 drivers in total. In the buggy class it was Dmitri Mosin that took the TQ spot, while in truggy Alexander Mosin was in top spot. In the buggy final, Ukrainian driver Andrey Talalov jumped into the lead after only a few minutes and was able to take hom the win by 4 laps ahead of Maxim Masalsky in 2nd and Vladimir Ceiko in 3rd. The truggy class was won by the pole man Alexander Mosin, with Kirill Verigo taking 2nd and Aleksey Mazur 3rd.

Source: RC Racing BY [rcracing.by]

See the original post:
Belarusian Nitro Off-Road Championship Rd2

New for the S8-BX buggy and S8-TX truggy, LRP releases tuning parts for their successful off road line-up. The wide range of carbon and aluminium options help Increase the performance on all surfaces, as well as lower the overall weight of your car and help reduce rotating mass to improve the handling of your car. The new parts include carbon front and rear shock towers as well as steering bracket, steering top plate, centre brace top plate and steering servo mounting plate. The new aluminium parts include lightweight upper shock mounts and front and rear CVD outdrives.

Source: LRP [lrp.cc]

Read more here:
LRP S8-BX & S8-TX option parts

Following on from sister company LRP’s releases earlier this week, comes the identical Nosram red releases, including this hard case 4800mAh ‘X-Treme Race’ pack with upgraded 40C discharge rate. As with the blue version this new saddle pack is developed to deliver big power combined with long run time and is mounted in a durable hard case to keep the cells from being damaged during use. Also new in the Nosram line are the 2 new PMax 1600mAh RX-packs that feature higher capacity and allow an extended run time. The voltage is significantly higher compared to the previous 1400 RX batteries and they offer significantly higher power for the servo. Available in flat and hump pack versions.

Source: Nosram [nosram.com]

Read the rest here:
Nosram 4800 40C Saddle & 1600 RX packs

Jab Graphix have announced the release of their new line of body wraps for the JConcepts Punisher body, suitable for the Losi 8ight-T 2.0. As with all of the Jab Graphix wraps, the Punisher line of wraps are fuel resistant and come die-cut for easy installation. Racers can choose from any of the professionally created designs and easily customize each design to their liking.

Source: Jab Graphix [jabgraphix.com]

Continued here:
Jab Graphix Punisher body wraps