Reedy’s hard case 40C 1:8 LiPo batteries are now available in 5S 3800mAh 18.5V and 6S 3100mAh 22.2V configurations for those who want the added efficiency that higher voltage delivers. These batteries fit perfectly in Team Associated’s RC8e, SC8e, and RC8Te and are suitable for use in many other chassis’. For minimum resistance and maximum power delivery, 10-gauge wires are pre-wired and ready to add your favorite connector. Balancing harness makes balancing and balance charging simple and convenient while a hard case helps protect the batteries from crash damage.

Source: Reedy [rc10.com]

View original post here:
Reedy 5S 18.5V & 6S 22.2V Competition LiPo packs

Castle Creations have announced the release of their new Mamba Max Pro brushless ESC featuring ‘Smartsense’ operation. Smartsense brings the best of sensored and sensorless together to create the ideal controller for serious 1/10th scale enthusiasts. It uses the motor sensors to start the motor and then it switches over to Castle’s ultra powerful and efficient dynamic sensorless mode which boosts motor efficiency. Simply put, you’ll get more power and less heat from your motor. Castle’s high energy advanced timing allows users to electronically advance their sensored motor’s timing to extreme settings. This can often yield just that extra bit of power needed to win the race. Operating at up to 6S, the Mamba Max Pro can handle nearly twice the power of the market standard Mamba Max.

Source: Castle Creations [castlecreations.com]

The rest is here:
Castle Creations Mamba Max Pro brushless ESC

Last weekend saw the third round of the 1/8th scale Campeonato Argentino take place in Córdoba, host track of the 2007 World Championships. Pole position for the race went to Mugen/Sirio driver Sebastián Recio, who converted his starting position into the win. Runner up on the day was team mate Agustín Cutini with third place going to Serpent driver Francisco Rinaldi. After this race the Championship standings saw Sebastián Recio take the title followed by Agustín Cutini, with Juan Ignacio Matticoli in 3rd.

Thanks to Roxana Palazzo for the report.

Source:
Recio wraps up Argentinian title with Rd3 win

Having done the double at last week’s poorly attended IFMAR World Championships in South Africa, Team Durango/CS team driver Martin Achter got in touch with us with a short statement following his arrival back in Germany.

I’m back again at home from the Worlds in South Africa. It was a really well organised event and the track was awesome! I really have to thank my sponsors Team Durango, CS-Electronics and Hoeco. And to say something about the safety of this Worlds, I think no one felt ever unsafe, on and off the track. I enjoyed the time very much in SA, very friendly and helpful people at the track. I will never forget this event!

Source:
Statement from World Champion Martin Achter

Search Engine Keywords:

• martin achter rc

Tekno RC have announced some hot new products for the Losi 8 and Hot Bodies D8 line of 1/8th scale vehicles. First up is the new adjustable wing mount for the Losi 8B/8T (and D8/D8T/Ve8). A direct fit for the Losi it is made from an extremely durable plastic composite and has adjustable angle and height. No more body clips to hold on the wing, instead screws take up this task for a tightly fitted wing. The new wing mount is also designed to fit the Hot Bodies D8/D8T/Ve8/Vorza line using of one of their 3 new shock towers. The new rear shock towers are machined from 5mm thick 7075 T6 aluminium and are lighter and stronger than stock and are hard anodized for a sleek appearance. By using the bulkhead as an attachment point for the wing rather than simply attaching it only to the shock tower, the new wing mount and shock tower combo is far more durable than stock. Finally there are two separate towers for the D8/Ve8/Vorza buggies, a standard stock replacement and one for the optional 112mm shocks. All of these shock towers accommodate the new Tekno RC Adjustable Wing Mount, the stock wing mount, or the Losi 8 wing mount.

Source: Tekno RC [teknorc.com]

Read the rest here:
Tekno RC D8/T & Losi wing mount & Shock towers

Elite RC have announced the release of their new unique electric motor mount for brushless conversions of gas cars, this one for the MP9. The slide and lock design means there are no gaps and so the motor block has full contact with the mount and so it will not bulge, giving a perfect mesh every time. Machined from solid aircraft grade 7075 T7 aluminium it is very rigid and can handle all the torque from the motor, but despite its strength it weighs in at little over 2oz. Another unique design feature is the 5